All Terrain Tractors
BCS All Terrain Tractors.
Key features :
These are versatile short wheelbase tractors particularly suited to work on slopes due to the weight distribution and low centre of gravity. A central pivot allows the front and rear halves of the tractor to follow the ground contours. With a width of less than 100cm these high power tractors can access many sites normally unreachable by conventional tractors. The reversible driving position makes the Valiant a very useful tool for specialist farming, municipal, conservation and green areas.
This tractor is considered the version of reference for the specialised sector and above all has to satisfy the standards dictated by the particular type of use and in particular, be compatible with the environment in which it is used.
The compact dimensions and the reduced turning radius make the Valiant AR an irreplaceable machine, able to perform all the tasks it was designed for in the best possible way.
The width is limited to less than 100 centimetres and the wheelbase has been reduced to 139 centimetres. The new transmission is integrated with the OS-frame: one shaft and one central joint only guarantee high transmission power to the wheels and power take-off, for maximum reliability. The driving position, which is reversible or mono-directional, makes the Valiant AR a useful tool for farming, municipal sectors and for working in green areas.
This is the most practical version of the Valiant and is that which is suitable for a greater variety of uses.
Thanks to their qualities the Valiant RS tractors are ideal for the winegrowing and fruit-growing sectors: the compact overall dimensions, the high power and, as for the other Valiant isodiametric tractors, the correct weight distribution on the axles with the machine under a working load, make these tractors incomparable in vineyards and orchards.
The gear ratios on all the Valiant tractors give you an
The OS-frame transmissions optimize the traction and stability of the machines at work, thanks also to a single central joint which lets the front axle oscillate by up to 15° with respect to the rear axle. The hydraulic system is double circuit, with an overall flow of 36 L/min at working pressures of up to 180 bar, for excellent performance on the whole Valiant series, the best performance in the category.
This is the version of the steering wheels tractor for cutting fodder, a machine which must be powerful, reliable and safe for the particular use, especially in sloping areas.
The Valiant MT tractors have been designed for heavy use in conditions of maximum stress, with the emphasis on performance and especially safety and driver comfort: ROPS, comfortable cabs and the characteristic controls, make the driver’s cab practical and welcoming. Comfort, ergonomics, practicality and safety combine in an original and exclusive way.
The tractor has a very low centre of gravity to guarantee the maximum stability on slopes and the rational flow of cut fodder under the machine, without compromising ground clearance.
The Self-Cleaning-System® is the innovative system with a double fan that keeps the radiator and air suction grilles clean, thus protecting the cooling system from dust and debris produced while cutting and processing the fodder.
The Dual-Floating-System® assists the rear lift and lets the equipment float in a harmonious way on the ground, for optimal use.
POWER, PERFORMANCE AND ECONOMY.
The route to be taken is always uphill, the work to be done always has strict deadlines that need to be kept to, harvests cannot submit to the demands of your vehicle and that's why you need the very best performance from the VM D753 Tier III engines that are supplied on the new Valiant range: high performance engines that will allow you to always reach your target because they are produced with the knowledge that our customers' activities depend, above all, on the efficiency, the reliability and the economy of the machine used.
Two VM engines are available for the Valiant series, able to get the power out of every drop of fuel.
VM D753 E3 2.2 litre, 3 in-line cylinder, aspirated diesel engine. Developing 49 HP at 2600 rpm.
VM D753 TE3 2.2 litre, 3 in-line cylinder, turbo diesel engine. Developing 56 HP at 2600 rpm.
A UNIQUE TRANSMISSION SYSTEM.
The transmission comes with the OS-Frame which, with one single transmission shaft and one central joint, guarantees the maximum mechanical performance.
It is a "monolithic" structure in a single cast iron casting. The joint in the middle of the machine lets the front axle oscillate by up to 15° with respect to the rear, for excellent stability on slopes.
A STEP FORWARDS IN DRIVER COMFORT.
The driver's environment on the Valiant is one of the best in the category: it combines comfort, ergonomic qualities, functionality and safety in an absolutely original way.
The driving seat is made-to-measure for the driver: the cab driving module, with the platform suspended on silent-block, guarantees the maximum comfort.
The instrument console contains the functions in a central display with a logical layout, and guarantees excellent control of the machine.The instruments come in both analogue and digital versions, the latter can display the engine rpm, forward speed and rotation speed of power take-off.
THE STRENGTH OF LEVERS.
The rear lifts are strong and use practical and versatile multi-purpose attachments, which adapt well to all the equipment on the market.
Supported by the hydraulic system, on request, they can be provided with the assistance of position and draft control.
DUAL FLOATING SYSTEM®
The system uses two cylinders connected to the independent hydraulic system with a nitrogen accumulator which, with those of the rear lift, control the suspension of the equipment in a fully autonomous way with respect to the lift itself.
The "Dual Floating System®" makes sure the tool is always parallel to the ground and lets you adjust the load of the equipment on the ground with extreme precision, in relation to the weight.
Thanks to an easily accessible control, connected to an analogue manometer, you can change the internal pressure of the hydraulic suspension system at any time, and therefore the actual suspension capacity required.
ACCESSIBLE TO ALL.
The width and the height, the footprint on the ground, and the more or less aggressive 'GRIP' are just some of the aspects that give the wheels of specialized tractors a fundamentally important role. We have tested the best alternatives on the market for the new Valiant, so that our customers will always have the right solution to meet their requirements.
Implements for Valiant
The Dragone V series Flail Mowers are designed for cutting grass and heavy scrub land by demanding professional users such as local authorities and contractors. Large diameter rotors and heavy duty build of the frame and transmission give top results in the worst of operating conditions.
The VICTOR 300 and 400 AR tractors are a new concept in agricultural machinery. Dynamic and rational, they are designed to meet the diverse needs of both the professional and the “part-time” farmer. The compact dimensions and reduced steering radius allow these tractors to move easily through all crop rows. Powerful engines with low emission levels and fuel consumption make the VICTOR ideally suited to a wide range of applications. Permanent 4-wheel drive and excellent stability enable these tractors to work on any type of terrain and in all weather conditions. The ergonomic design of the tractors simplifies the task of the operator, significantly reducing fatigue and stress.
The VICTOR 300 and 400 are medium power ar ticulated tractors with centre pivot and equal-size front and rear wheels. These two new tractors with their outstanding innovative features have been specifically designed for use in vineyards, orchards or greenhouses and to meet the needs of the part-time farmer.
The indirect injection diesel engines installed as standard on the VICTOR
tractors incorporate the very latest combustion and injection systems.
The low-turbulence prechamber, overhead camshaft and belt-driven
timing, all add up to an engine with optimum
combustion efficiency and low mechanical
The masses of the moving parts have
been reduced to a minimum and
optimised crankshaft balancing
ensures that vibration levels are
around the lowest detectable values.
The injection system design, based
around a patented pump-injector unit, and
the optimisation of those components having
The large-diameter clutch fitted to the VICTOR offers smooth, progressive engagement and an unlimited service life. The gearbox, with spur gearing specially designed to reduce noise levels, offers 12 speeds-8 FWD and 4 REV. The gear ratios are rationally distributed to cover a wide range of applications, allowing full use of the power delivered by the engine for maximum productivity in all working conditions.
The short wheelbase and central articulation gives the VICTOR a much reduced turning circle that allows rapid, precision manoeuvring between even the narrowest crop rows. The servo-assisted hydrostatic steering is smooth and precise, with a minimum turning radius of just 2200 mm.
The VICTOR is equipped with a monobloc hydraulic rear lift with a vertical ram cylinder and 3-point hitch Category I. The lifting capacity at the link ends is 700 kg.
Tyres are a critical factor when it comes to obtaining the best results in all ground conditions. BCS offers a wide choice of tyres with different characteristics and tread patterns to ensure perfect grip on any surface.
** COMING SOON **
The BCS Invictus, available in 2 models :
300 - 25hp Kubota engine
400 - 35hp Kubota engine