Kersten Weedo II

Compact Weedbrush

Kersten Weedo II

Overview

The Weedo II is a dedicated weedbrush for areas such as social housing and is ideal for contractors covering many small sites. The weedbrush allows clearance of both moss and more stubborn weeds from hard surfaces such as tarmac or block paving.

Operating the machine is as simple as one lever, the left hand controls the operation of the brush, while the operator controls the forward speed by varying the pressure of the brush on the ground. The folding handlebars and its compact design means it is easily transported from site to site and allows it to excel in tight areas. Many fine adjustments enable the brush consumption to be greatly reduced and the operator comfort to be increased. The weedbrush can be set to the right or the left hand side of the machine for clearing long paths in either direction.

CALL US

EMAIL US

Specs

Key Features

Vibration Dampened

The Briggs & Stratton engine is isolated from the chassis by rubber mounts and a dense steel plate. This isolation prevents much of the engine vibration being transferred through the handlebars and to the operator’s hands. This function results in low hand-arm vibration, allowing the operator to use the machine for longer periods of time.

Folding Handlebars

The handlebars can be folded over for easy transport in compact vehicles. The handlebars also come with many adjustments to make them comfortable for different operators. Vibration dampening is built into the design to extend the time the Weedo II can be operated for in a day.

Left or Right Hand

The weedbrush can be set to the right hand or the left hand of the machine, so the operator can go along a kerb in either direction. This allows long sections of weed removal to be achieved more easily and enables the direction of travel to be with or against the flow of traffic.

Angling all Ways

The angle of the brush can be finely adjusted without tools in all directions to allow minimum operator effort on a variety of surfaces, this also allows the brush to be positioned for brilliant clearing of flat surfaces, or surfaces with crevasses such as block paving.

Debris Guard

The debris guard is used to keep stones and swept material close to the brush so it can be easily collected from the surface by a sweeper. The guard can be adjusted for height and also position, to ensure the best placement of the guard.

Videos