Eliet Super Prof
The new Super Prof marks the start of a whole new generation of Super Prof Eliet shredders. While keeping its original DNA, the new machine is more comfortable, more efficient and more environmentally friendly; it has added robustness and is smarter, safer and easier to maintain. The new Super Prof is made especially for you, for your future, your comfort, your profit and for the preservation of nature.
ELIET CHOPPING PRINCIPLE™
LET THE WOOD DO THE WORK
This chipper technology exploits the weakness of wood by cutting with the grain. The blades of the ELIET shredders cut into the garden waste like miniature hatchets. As a result, the wood is cut with the grain. A passel of blades repeats the cycle a thousand times a minute. The process results in uniform chips that are perfect as a mulch layer or on your compost heap.
ELIET ECOEYE™ SYSTEM
The new generation Super Prof seeks to build on that exemplary position by making garden professionals aware of the fact that environmentally-friendly work methods can yield considerable savings.
For this reason, the Super Prof MAX is equipped with ECO EYE™ technology. While analysing the engine’s behaviour the electronic system can recognise whether or not the machine is shredding effectively. If that is not the case, it makes no sense to have the engine perform at full capacity and the ECO EYE™ system will automatically reduce the power to stationary. An infrared eye guards the feeding zone of the feed hopper. As soon as any motion is detected there the system increases the engine’s power back to full speed in less than a second to allow the operator to resume shredding at full speed.
The ELIET ECO EYE™ system works totally autonomously; saving on fuel consumption does not require any effort from the operator! The environment and the residents in the immediate area of the operating zone also benefit from the reduced emissions and sound levels. The dashboard sports a push button to activate the ECO EYE™ system. In these machines, the mechanical throttle lever was substituted for electric operation.
For garden professionals, the Super Prof has the reputation of being capable of processing almost any kind of green waste. Building on that reputation, ELIET developed the Axelero™ discharge system for the new generation Super Prof.
The wood and green waste chips keep rotating in the chipping chamber until they are small enough to be discharged through the holes in the calibration sieve. They then fall into a second chamber, equipped with a special wheel that collects the chips along the width of the outlet and through a combination of air movement and high expulsion power, catapults them out of the machine via the chute. The low noise Axelero™ system is effective for any type of green waste, regardless of its humidity, and ensures that the Super Prof can be used throughout all of the four seasons.
Wheel Drive SD
The wheels of the new Super Prof were equipped with a powerful wheel motor. The speed forward or in reverse is controlled with a simple movement from the pulse via a rotating handle on the handlebar. The more the handle is rotated forwards or backwards, the faster the machine moves in that direction. The wheel drive is so powerful that it takes only one man to load or unload the machine from a van or a trailer.
The feed opening was made wide on purpose, but without compromising on the machine’s compactness. The feed hopper has become considerably larger mainly at the top. This makes for a larger feeding plateau, allowing the operator to place the green waste quicker and have both hands free to manipulate the waste. The special shape of the hopper walls pushes the waste towards the 45 cm wide central bottom of the hopper. This flat bottom does not get any narrower towards the feed roller. The feed roller can lift up to 13 cm, which creates a huge infeed opening. This feature is highly appreciated by professionals when they are feeding branches with many twigs or voluminous cutting waste.
All the features of the machine are grouped in a well-organised dashboard at the front of the machine. The large LCD screen stands out at the centre between the ignition key and the choke valve. It is via the LCD screen that the Super Prof communicates with its operator. Besides showing useful machine features, it tells the operator when maintenance is due. Below the display is the machine’s most essential button: the ‘Action’ button. This electronic control of the electromagnetic coupling engages the blade system and the Axelero™ and ensures that the feed roller can be activated. At one push of the button, the shredder beast comes to life.
The Super Prof blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the flying chips. As a result, the machine has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 2 m – 8ft and a rotation span of 300°.
Collapsable Blow Chute
The blow-out level of the Super Prof is at 2 m – 8 ft. An important asset, as it allows you to blow the chips from any possible location to where you want to deposit them. To make sure that the height does not pose a problem for transport, the chute can be collapsed onto the machine and clamped in place. Its height is thus reduced to 1.45 m – 4.75 ft.
To ensure simple and intuitive control, the operating mechanism of the feed roller was separated clearly and visually. Push buttons within reach allow for selecting feed/reverse feed. Integrated LED lights in the button highlight the selection. One push of the emergency stop handle or one of the buttons will neutralise the selection and immediately stop the feed roller. This ultimate operating simplicity is a guaranteed time saver.
Engine selection: 18 HP B&S Vanguard
Number of Cylinders: 2
Cylinder Capacity (cc): 570
Shreddable Timber Diameter: 130 mm
Capacity: 6m3 chips/hour
Engine Start System: Electric
Shredding Technology: Eliet Chopping Principle™
Clutch: Electromagnetic + Brake
Knives: 6 disks, 24 blades Eliet Resist™
Feed Intake Opening: 500 x 700 mm / 20″x28″
Feed Height (mm/inch): 1000 mm
Chopping Movements/min: 50.000
Number of Knives: Eliet Resist™ (24 pc.)
Discharge Height: 2000 mm / 80″
Chassis: Steel 3 and 4 mm / Epoxy Powdercoating
Wheel Traction: 2 Hydraulic Engines (100 cc)
Front Wheels: 4.00 -4 Pneumatic Tyre
Back Wheels: 6.00 x 9 Pneumatic Tyres
Capacity of the Fuel Tank: 18 L
Cutting Width: 480 mm
Transmission: V-belt XPA 2120 x2 Powerband
Feed Assistance: Hydraulic Diam. 156mm
Power Control: ABM (Anti-Block Motor)
Dimensions (L x W x H in mm / inch): 2000 x 835 x 1450 mm / 80x83x58″ / low gravity point
Noise level Lw(A): 116 dB(A)
Calibrating Sieve: Option – Holes 35 x 35 mm
EcoEye System: Option – Speed Controller for Infeed Roller: Option