BRUSHCUTTERS
Brushcutters and Rough Cutters at RT Machinery.
BRUSHCUTTERS
Brushcutters and Rough Cutters at RT Machinery.
BRUSHCUTTERS
We have a fantastic range of Brushcutters and Rough Cutters for you to choose from!
Here at RT Machinery, we have been championing the “Etesia Attila” or ride-on brushcutter since their initial launch into the UK market by Etesia UK in 1996.
Etesia Attila professional brushcutters are designed to cope with the most difficult conditions. They are ideal for second homes, meadows, orchards, fallow land, verges and embankments. Very robust, but also extremely manoeuvrable, they guarantee unrivalled effectiveness in rough and tough conditions.
The first Etesia Attila 85 (AV85) launched in 1996.
The principles owe their success to well-proven cutter design used in agriculture for many years – a simple principle similar to a topper of getting material in and out of the deck without sapping power or blocking through clumping. This is achieved with a good open front deck access and an exit of material through a clock face pattern of three o clock through to seven o clock. A strong central bar blade turned by a large v belt pulley ensures its torque and power without the need for high rpm. The twin swing tip blades have a little give if needed and are easy to rotate for a new sharp edge or to remove for sharpening. Pop all this into a low centre of gravity chassis.
These basic principles remain the same from the original Etesia AV85’s and Orec Rabbits we first sold, to the powerful 4-wheel drive units that we sell from Iseki, Etesia, Billy Goat and Orec today that complement the range.
We have tried and tested most and firmly believe the build quality and capability of our Brushcutters give us an unequalled range and choice from stock. There is a quality feel to these units right down to the last nut and bolt and that’s important when you are relying on their strength to get you through difficult brash or across difficult, sloping terrain.
We believe in these products and as such offer you a minimum of a 24-month warranty on any new Brushcutter, with up to 36 months if they are serviced annually by a competent engineer with original parts. We will also help you identify the right machine for the job, demonstrate and deliver – with an installation – using our own team, straight to your door. “Seeing is believing” as they say, so take a look at our video clips or contact us to arrange to see one in action.
We also have a range of alternative Brushcutter type machines or Rough Cutters to compliment the Attila’s and Ride-on Brushcutters.
With the tough pedestrian tracked or wheeled Flail Mowers from Orec, the pedestrian Attila AH75 from Etesia and the Ventrac Tough Cut Mower, we probably have one of the best ranges you can see in one place. Add to that lot an armchair controlled remote Brushcutter on tracks from X Rot and we have a selection for any task!
OUR BRUSHCUTTERS AND ROUGH CUTTERS
Browse through our range of Brushcutters and Rough Cutters!
Barbieri X-ROT
Remote Control Mulching Mower
Overview
The Eco Bank Mowing system X-ROT.
This robotic mower is an efficient and economic solution for banks and inaccessible areas.
The X-ROT benefits from a Honda 10hp OHV Petrol Engine and a Hybrid Drive Transmission – electric motors drive the crawler track system, making it a very light vehicle that moves easily on uneven ground and slopes with no soil compaction and no side drifting. Its weight and size also makes it easy to be transported in a small van or pick-up.
It has tough construction with Swing Tip Razor back blades and a 70cm cutting width with full distribution for clippings. The cut height ranges from 40mm to 110mm with electric adjust and the whole machine can be operated by remote control from up to 200m.
This is a low footprint machine!
Specs
Videos
Downloads
Barbieri X-ROT EPower 70 EVO
Remote Control Mulching Mower
Overview
The Eco Bank Mowing system: X-ROT – now with battery power.
This remote control mower is an efficient and economic solution for banks and inaccessible areas.
This X-ROT model uses lithium powered batteries, making it a more sustainable option. It’s also a very light vehicle that moves easily on uneven ground and slopes with no soil compaction and no side drifting. Its weight and size also makes it easy to be transported in a small van or pick-up.
It has tough construction with Swing Tip Razor back blades and a 70cm cutting width with full distribution for clippings.
Main Features
Specs
Videos
Downloads
Barbieri X-ROT Flail 80
Remote Control Flail Mower
Overview
The Eco Bank Mowing system: X-ROT.
This remote control mower is an efficient and economic solution for banks and inaccessible areas.
The X-ROT benefits from a Vanguard B & S 23hp Petrol Engine.
Main Features:
– Cutting height adjustment from remote control
– NR. 40 ‘Y’ blades for heavy flail operation
– Climbing ability (slope): 100%
– Strong structure suitable for heavy duty jobs
Specs
Videos
Downloads
Etesia Attila AK88
Ride-on Brushcutter
Etesia Attila AK95
Ride-on Brushcutter
Overview
Specs
Videos
Downloads
Etesia Attila AK98
Ride-on Brushcutter
Etesia Attila AK98X
Ride-on Brushcutter
Overview
The Etesia Attila AK98X is the largest of the Attila range, offering powerful and extreme brushcutting in any condition thanks to its powerful new Kawasaki 24hp electric start engine.
The 4WD, heavy-treaded tyres, differential lock and low centre of gravity gives you greater stability on slopes up to 30°. This allows for greater flexibility in a wide variety of sites – long grass, weeds, bracken and brambles on woodland paths, orchards, verges and embankments.
Swing or fixed tip blades with a 98cm cutting height adjusted by a centralised lever with 8 working positions from 50mm-120mm plus transport mode enable this workhorse to cut through dense growth of up to 4.5cm diameter!
Specs
Videos
Downloads
Etesia Attila SKD
Ride-on Brushcutter
Overview
The Etesia Attila SKD, the smallest ride-on brush cutter in the range, provides a compact machine capable of tackling dense vegetation. It’s also a very capable and cost effective method for slope and bank work, being approved to work on slopes up to 27 degrees with the factory dual wheel stability kit fitted. Dual tractive wheels give both extra traction as well as superior stability, ensuring the operator has control and faith in the most awkward and arduous of working conditions.
The SKD is ideal for wetlands and conservation areas too, and is also just as much at home on general grass cutting with a finish that allows it to cut lawns and meadows. It’s fitted with a deck made from mastershock, a manmade compound that’s strong and doesn’t rust to provide a longer life.
You can bank on Etesia when the going gets tough.
Specs
Videos
Downloads
Etesia Attila AK60
Pedestrian Brushcutter
Overview
With a working width of just 60cm, the Attila AK60 really can get to the areas that others cannot! It provides one of the most accessible brushcutters on the market, with built-in rugged reliability as standard.
Designed to work in the most difficult conditions, this little giant will clear brush, brambles and bracken from woodland paths, orchards, meadows, holiday homes, roadsides, and indeed anywhere with vegetation to clear.
Features
Specs
Videos
Downloads
Etesia Attila AH75
Pedestrian Brushcutter
Overview
With built-in rugged reliability as standard, the Etesia AH75 pedestrian brushcutter has been designed to work in the toughest of conditions. This powerful workhorse effectively deals with clearing vegetation from a wide variety of sites – long grass, weeds, bracken and brambles on woodland paths, orchards, holiday parks and road verges. Ease of operation and manoeuvrability ensure total efficiency and high output.
Features
Specs
Videos
Downloads
Etesia MKHPF Hydro 80 / Attila
Ride-on Brushcutter
Overview
Attila for home and garden, woodland or meadow.
Etesia has expanded its offering in ride-on brushcutters by using its proven Hydro 80 Professional Bahia platform to power its SKD Toughcut Attila Deck. With 15hp V Twin Kawasaki power, the Toughcut 85cm deck, Swing tip blades and tractive tyres, this versatile and tough machine puts brush cutting into your garden or meadow at an affordable level.
The MKHPF can mow in any weather. 5 cutting heights from 50 to 92 mm for perfect mowing on high and wet grass.
You can bank on Etesia when the going gets tough.
Specs
Downloads
Ferris FRC7
Hybrid Remote Controlled Mower
Overview
Less physical strain, no exposure to vibrations and an overall safer operation. The new Ferris FRC7 remote-controlled mower ticks all the boxes and greatly improves the operator’s ease and comfort in maintaining the urban green space. Especially those areas that are difficult to reach in terms of underground and orientation.
The FRC7’s remote control allows the mower to be operated from up to 300 m distance and its tracked low-gravity undercarriage ensures stability on steep inclines up to 55°, as well as providing superior traction.
Both the tracks and mower deck are electrically driven by a very responsive hybrid e-drive system that combines a combustion engine with a 48V DC battery drive system, resulting in a highly effective powertrain. The FRC7 can drive up to 200 m on battery power only without having to start the engine. It can also mow forwards and backwards, making turning on a slope unnecessary and preventing potential damage to the underlying soil.
The 23HP Vanguard® EFI engine is fuel-efficient and operates independently from the electrical system. Its load-sensing ability keeps the mower deck performing optimally and automatically adjusts the drive speed when conditions get tougher, guaranteeing maximum blade performance and efficiency – there is no stress device fitted.
A CANBUS Controller is fitted to provide constant data, assisting with maintenance and servicing. 115cm cutting width. Service Jack and top hoist points are included as standard. Industry-leading safety features. Cutting height 50mm to 180mm.
Specs
Videos
Downloads
Iseki SRA800
Ride-on Brushcutter
Overview
The Iseki SRA800 is a simple low-cost ride‐on brushcutter capable of cutting grass and thick vegetation right up to saplings. Their low height aids stability when used on slopes and belies the work rate and capability. These machines are powered by Kawasaki electric start 16hp petrol engine and have hydrostatic drive and a rear brush protection frame. Upgrades include solid pressure related tyre fill to prevent punctures and led flashing work lights.
In keeping with our goal of seeking out products that work within our environment sympathetically, we’re delighted to say that this machine can accept E10 Petrol Fuel.
Specs
Videos
Downloads
Iseki SRA950F
Ride-on Brushcutter
Overview
The Iseki SRA950F ride‐on brush cutter is more than capable of cutting grass and thick vegetation right up to saplings. Its low height aids stability when used on slopes and its highly efficient four-wheel drive system gives it the attributes of an agile mountain goat. These amazing machines are powered by a torquey Kawasaki electric start petrol engine producing 24hp, with a very controllable hydrostatic transmission drive and a cutting width of 95cm. The Iseki SRA950F also comes with a comfortable seat and rear protection bar.
In keeping with our goal of seeking out products that work within our environment sympathetically, we’re delighted to say that this machine can accept E10 Petrol Fuel.
Specs
Videos
Downloads
Orec FL500BC
Walk Behind Samurai Brushcutter
Overview
The Orec FL500BC brings brush cutting and rough-cut clearance to an affordable level without compromise.
Walk Behind Brush Cutter
The FL500BC, a Walk Behind Brush Cutter by OREC, will slash all types of brush including medium grass, weeds, undergrowth, suckers, seedlings and even the lawn. The blade is designed to be horizontal, so it can be used as a lawn mower with a low mowing height setting, giving a neat finish in orchards, pathway areas or churchyards.
Used by professionals across many industries from landscaping and park maintenance to organic farming and vineyard management, the Samurai has become a staple among outdoor professionals because of its one-of-a-kind, user-friendly design.
A cut off the old block and built as tough as any of the Orec products! Reliable and powerful Honda engine, independent blade and traction drive, tough gear drive mechanism for traction through two large rear wheels, steel deck, single easy-adjust height controls and an independent engage and lock blade drive.
Specs
Downloads
Orec HR662
Pedestrian Flail Mower
Overview
Orec’s original since 1980 (Well a few changes since then for the better of course).
Orec’s AHR662 Flail Mower is a walk behind brush mower that clears brush and mulches it for you!
A walk-behind brush mower that mulches
Our wheeled model offers the same cutting width and reliable engine as the track model. This wheeled version comes with the same awesome flail blade cutting system as the track model, but is actually lighter even with its wide agricultural tyres! This walk-behind brush mower and it’s impressive simply adjusted screw type “No Tools Needed “ height adjuster and thirty-eight flail blades will take down tall grass, high weeds, brambles, and even small saplings. The flail will chew up and mulch down the brush, so you don’t have to!
The reliable high output Honda GX270 Engine gives ample power and easy starting and the traction is transferred through a reliable heavy-duty three-speed transmission with reverse.
This all-in-one brush mower and mulching machine is easy to use, provides a simple clutch turning system, has easy blade height adjustment, and is lower in price than many far less able machines.
Bank and slopes can be tackled up to 25 degrees. Offset adjustable handles allow close work to hedgerows or obstacles.
Specs
Videos
Downloads
WHY WE LOVE IT
Orec HR662 Flail
The pedestrian flail mowers manufactured by Orec are, I believe, the best value flail mowers in the market.
With typical Japanese production and quality, they combine ease of use with strong product design. The back-to-back swing flails, single point height adjustment and powerful Honda petrol engines ensure a crisp, neat cut in brash, long grass or woodland.
With either low-profile, low-ground-pressure tractive tyres, or puncture-free rubber tracks, they can be used anywhere from marsh borders to heath or woodland. Excellent in plantations, countryside or annual growth management and will even work on slopes with the tractive track grip.
Orec HR812
Pedestrian Flail Mower
Overview
Orec’s original since 1980 (Well a few changes since then for the better of course).
Orec’s HR812 Flail Mower is a walk behind brush mower that clears brush and mulches it for you!
A walk-behind brush mower that mulches and tackles the toughest of jobs
Our tractive grip wheeled model offers a greater cutting width and increased power over the standard wheeled or tracked models. This awesome 800mm (31.5″) version comes with the same proven flail blade cutting system as the standard and track models, and despite its increased width, handles the terrain well with its wide agricultural type tyres! This walk-behind brush mower and it’s impressive, simply adjusted, screw type, “No Tools Needed “ height adjuster and 46 back-to-back sharpened flail blades will take down tall grass, high weeds, brambles, and even small saplings. The flail will chew up and mulch down the brush, so you don’t have to!
The reliable high output Honda GX340 389cc Petrol Engine gives ample power and easy starting and the traction is transferred through a reliable heavy-duty three-speed transmission with reverse and heavy duty corded final drive belts.
This all-in-one brush mower and mulching machine is easy to use, provides a simple clutch assisted turning system, has easy blade height adjustment, and is lower in price than many far less able machines.
Overgrown and inter row regular works in woodland, garden, park or paddock can be tackled, from a pathway to a clearance project. Offset adjustable handles allow close work to hedgerows or obstacles.
Specs
Videos
Downloads
WHY WE LOVE IT
Orec HR822 Flail
The pedestrian flail mowers manufactured by Orec are, I believe, the best value flail mowers in the market.
With typical Japanese production and quality, they combine ease of use with strong product design. The back-to-back swing flails, single point height adjustment and powerful Honda petrol engines ensure a crisp, neat cut in brash, long grass or woodland.
With either low-profile, low-ground-pressure tractive tyres, or puncture-free rubber tracks, they can be used anywhere from marsh borders to heath or woodland. Excellent in plantations, countryside or annual growth management and will even work on slopes with the tractive track grip.
Orec HRC673
Tracked Crawler Pedestrian Flail Mower
Overview
According to the manufacturer and many of its users, this is the best tractive flail mower in the world. Its flails cut brush much finer than a rotary blade. You’ll be amazed at how much brush this monster can mash. The crawler system gives good traction on the slope and soft ground and the side clutch steering system enables you to turn the machine easily.
With a cutting width of 650mm (HRC662) or 800mm (HRC802), you have the flexibility you need to get the best model for your needs.
Specs
Videos
Downloads
WHY WE LOVE IT
Orec HRC673 Flail
The pedestrian flail mowers manufactured by Orec are, I believe, the best value flail mowers in the market.
With typical Japanese production and quality, they combine ease of use with strong product design. The back-to-back swing flails, single point height adjustment and powerful Honda petrol engines ensure a crisp, neat cut in brash, long grass or woodland.
With either low-profile, low-ground-pressure tractive tyres, or puncture-free rubber tracks, they can be used anywhere from marsh borders to heath or woodland. Excellent in plantations, countryside or annual growth management and will even work on slopes with the tractive track grip.
Orec RM60W Rabbit
Ride-on Brushcutter
with Twin Offsets
Overview
In the Champagne region of France, where the price of farmland is incredibly high, not a bit of space can be wasted and the space between the rows of vines is narrow – only about one metre.
OREC, therefore, commercialised a Ride-on mower with an extremely narrow body width: the RM60G. This became a hot topic among growers, and a year later, more than 100 of these models were running around there. Today, the Ride-on mowers are also used on farms of the leading champagne brands Moet & Chandon and Dom Perignon.
Today the RM60G has developed into the RM60W, with offsets on both sides.
Thanks to its extremely compact size and low centre of gravity, the Rabbit Mower manages to be very agile and fast when mowing. If you have uneven ground or hollows, the front pivoting wheel axle always allows a safe and easy advance.
The retractable mobile wing appendages combined with the external rubber protection preserve the trunk of the plant during mowing operations, avoiding any kind of damage.
The outer wing extension retracts when an obstacle contacts the protection wheel or by simply pressing and releasing the control pedal. A lever on the top of the wingtip allows the wingtip to be lifted, with the swashplate disengaged, when moving.
Specs
Downloads
Orec RM830 Rabbit
Ride-on Brushcutter
Overview
The RM830 Drives like a go-cart and will make brush clearing fun and easy! With two flail blades on either end of the centre blade and a rock-solid spindle, you can take down woody material, tall grass, and thick brush. This entry-level model of the RM Series makes brushcutting quick, easy and with little physical strain on the operator.
Many professionals attempt to cut brush using an ordinary riding mower. As they quickly learn, these riding mowers are not designed for rough use. As a consequence for taking on hearty brush and thick, tall grass, ordinary mowers easily suffer belt brakes and damage to the spindle.
By contrast, this machine has added extra reinforcement and minimises damage through innovation in its design. In addition, the OREC Ride-On Brush Cutter’s low centre of gravity and locking differential feature makes this riding brush mower easy to operate, even when tackling slopes.
Specs
Downloads
Orec RM882 Rabbit
Ride-on Brushcutter
Overview
Orec RM882 “Rabbit” the original ride on brushcutter. Featuring low centre of gravity, 88cm / 35” cutting width, infinite cutting height 5-11cm, hydrostatic drive, swing tip hardened steel blade, differential lock, sprung seat and max forward speed of 6.25mph. Powered by a 16hp B&S Vanguard twin cylinder engine. Ideal for woodland and dense vegetation, and less frequently mown areas.
Specs
Videos
Downloads
Orec RM952 Rabbit
Ride-on Brushcutter
Overview
Have you ever had fun brush mowing? You can with the “Rabbit”, the original ride on Brushcutter, which drives like a dune buggy. Its low centre of gravity makes it easy to work, especially in places attachments and walk behinds can’t reach. Ideal for woodland, dense vegetation and less frequently mown areas.
Featuring hand controlled hydrostatic drive, infinite cutting height 5 – 12 cm and a max forward speed of 12km/h.
Specs
Videos
Downloads
Orec RM982F Rabbit
Ride-on Brushcutter
Overview
Have you ever had fun brush mowing? You can with the “Rabbit”, the original ride on Brushcutter, which drives like a dune buggy. Its low centre of gravity makes it easy to work, especially in places attachments and walk behinds can’t reach. Ideal for woodland, dense vegetation and less frequently mown areas. The RM982F has the added benefit of Orec’s on-demand hydraulic 4 wheel driving system so you can tackle the toughest areas.
Featuring hand controlled hydrostatic drive, infinite cutting height 5 – 12 cm and a max forward speed of 10km/h.
Specs
Downloads
WHY THEY LOVE IT
Orec RM982F Rabbit
Ride-on Brushcutter
“After more cutting in woodland, uneven and steep areas and through brambles, I am more than pleased with the performance of the Rabbit.I have been able to do significant areas slowed only by the roughness of ground and negotiating obstructions. In particular, I like the driver stability given by the width of foot spacing, the extremely precise and subtle speed control, and the fast change steering knob. Exceeded expectations. I’m very pleased with my choice.”
Orec ZHR800
Stand-on Tracked Crawler Flail Mower
Overview
The Orec ZHR800 “Zero Turn” hydrostatic stand-on flail mower achieves incredible work rates with double the working capacity of a tracked flail mower from the HRC series. In fact, in the best working conditions, the maximum speed of the ZHR800 is 7.5 km/h against the 3.5 km/h of the HRC813 model.
The operator has a much improved wider view compared to a traditional flail mower and in an emergency, the operator can dismount from the machine causing it to stop immediately. With fingertip controls and a powerful Honda GX390 engine, this machine is a pleasure to use both in work and in travelling to the working area.
The ZHR800 is also equipped with 4 useful strapping or load securing points for when transporting the machine. Thanks to its compact dimensions it can easily be transported on small and medium-sized vans.
The cutting unit is adjusted for cutting height electrically on the flick of a lever and the 80cm flail head can be lifted almost vertically to facilitate cleaning operations and maintenance of the knife drum. This lifting angle is only permitted for maintenance.
Features
Specs
Videos
Ventrac HQ682
Tough Cut Brush Mower
Overview
The HQ682 Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. A large baffled front opening helps direct materials into the deck and helps hinder debris from escaping.
Three heavy-duty blades counter rotate to cut and deposit waste evenly without windrowing. Capable of tackling saplings and large thorn bushes, the Tough Cut makes short work out of overgrown thickets.
The Tough Cut can be adjusted to three cutting heights: 3, 3 5/8, and 4¼ inches. Easy servicing of belts and pulleys is provided by the hinged and removable cover. The tilt-up deck provides easy access to the blades.
Specs
Videos
Downloads
WE’RE HERE TO HELP
Speak to our very knowledgeable team today!
 |
 |
|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|
 |
 |
